Power Suckers

Kit TT PoS100 - A 100 Watt Power Attenuator
Kit TT PoS100 - A 100 Watt Power Attenuator

TT PoS100 - Version 2019

The PoS100 attenuator is the steady further development of the PoS50 and provides a simple construction and simple handling together with a high power rating. The Pos100 can be used with a load of 4, 8 or 16 ohm and has a maximum power rating of 100 W.

The PoS is a resistive attenuator, which is used for power reduction and is connected between amplifier output and loudspeaker cabinet. It is NOT a reactive load. For this purpose the Tone-Hound must be used.

118,00 €

incl. VAT excl. Shipping costs
piece:
 
Kit TT Pos100 - UPGRADE-KIT
Kit TT Pos100 - UPGRADE-KIT

Upgrade kit for the PoS100 with the following enhancements:     

  • Selection of the adjustment range (Range)
  • Selection of the control behavior (Log/Lin)
  • The upgrade kit includes all components needed to update an existing PoS100 with these new features     
30,50 €

incl. VAT excl. Shipping costs
piece:
 
Kit TT Pos150
Kit TT Pos150
Next Generation PoS with 150 Watt and Range-Select and Lin/Log Switch
  • Power: 150 W RMS
  • Damping: 0 - 100%
  • Impedance: 4, 8, 16 Ohm
  • Range-Select
  • Lin/Log Switch
  • Line-Out
  • Size: ca. (H x W x D) 133 x 210 x 148 mm
Please note: The PoS is a resistive attenuator, which is used for power reduction and is connected between amplifier output and loudspeaker cabinet. It is NOT a reactive load. For this purpose the Tone-Hound must be used.
135,00 €

incl. VAT excl. Shipping costs
piece:
 
Kit TT Tonehound - 100 W / 16 Ohm
Kit TT Tonehound - 100 W / 16 Ohm

The TT Tonehound is a universal solution for home recording or recording in general. It consists of a reactive load and a speaker simulation.

219,00 €

incl. VAT excl. Shipping costs
piece:
 
Kit TT Tonehound - 100 W / 8 Ohm
Kit TT Tonehound - 100 W / 8 Ohm

The TT Tonehound is a universal solution for home recording or recording in general. It consists of a reactive load and a speaker simulation.

249,00 €

incl. VAT excl. Shipping costs
piece:
 
Kit TT Tonehound Light 100W / 16 Ohm
Kit TT Tonehound Light 100W / 16 Ohm
The TT Tonehound Light is the little brother of the TT Tonehoud, just without the cab-sim. It is a reactive load, ideal home recording or recording in general. The Tonehound light gets connected to a tube amp instead of a speaker and can get connected via the the built-in 6,3 mm jack with the recording equipment.

Power: 100 W / 16 Ohm
139,00 €

incl. VAT excl. Shipping costs
piece:
 
Kit TT Tonehound Light 100W / 8 Ohm
Kit TT Tonehound Light 100W / 8 Ohm
The TT Tonehound Light is the little brother of the TT Tonehoud, just without the cab-sim. It is a reactive load, ideal home recording or recording in general. The Tonehound light gets connected to a tube amp instead of a speaker and can get connected via the the built-in 6,3 mm jack with the recording equipment.

Power: 100 W / 8 Ohm
139,00 €

incl. VAT excl. Shipping costs
piece:
 
Kit TT Tonehound Light 50W / 16 Ohm
Kit TT Tonehound Light 50W / 16 Ohm
The TT Tonehound Light is the little brother of the TT Tonehoud, just without the cab-sim. It is a reactive load, ideal home recording or recording in general. The Tonehound light gets connected to a tube amp instead of a speaker and can get connected via the the built-in 6,3 mm jack with the recording equipment.

Power: 50 W / 16 Ohm
119,00 €

incl. VAT excl. Shipping costs
piece:
 
Kit TT Tonehound Light 50W / 8 Ohm
Kit TT Tonehound Light 50W / 8 Ohm
The TT Tonehound Light is the little brother of the TT Tonehoud, just without the cab-sim. It is a reactive load (Dummy-Load), ideal home recording or recording in general. The Tonehound light gets connected to a tube amp instead of a speaker and can get connected via the the built-in 6,3 mm jack with the recording equipment.

Power: 50 W / 8 Ohm
139,00 €

incl. VAT excl. Shipping costs
piece:
 
1 to 9 (from a total of 9)