Main page » Components » Potentiometer » Bourns » Bourns Potentiometer 100k Log SRT

Bourns Potentiometer 100k Log SRT

Product No.:: pbo-A100k-srt
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: piece
RoHs:: conform
Weight:: 0.015 kg per piece

3,96 €

incl. VAT excl. Shipping costs

piece:

Bookmark

Ask Question

Description

Bourns PDA24 Potentiometer, SRT-Type (Standard Rotational Torque), smooth torque
This specialty potentiometer is commonly used in guitar and bass amplifiers. However, it is also suitable for use in electric guitars and basses. This product is designed with the features most widely requested by amplifier designers.

Mounting: Panel
Shaft Type: round, straight
Terminal: Solder Terminal
Power Rating:
- Log: 250 mW (1/4W)
- Lin: 500 mW (1/2 W)
Max. Operation Voltage:
- Log: 250 V
- Lin: 500 V
Standard Resistance Tolerance: 15%
Operating Temperature: - 10 C bis +70 C
Diameter Shaft: 6,35 mm
LengthShaft: 19 mm
Rotational Torque: Standard, 20 to 40 g-cm

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Customers who bought this product bought also the following products:

WIMA MKP 10 - 0,047µF / 400 V - film capacitor

Type: Film capacitor
Dielectric: polypropylene film
Coating: plastic foil, metalized on both sides
Capacitance: 0,047 µF
Voltage Rating: 400 VDC / 250 VAC
Tolerance: ±10 %
IEC climate category: 55/100/56
Operating Temperature Range: - 55°C / + 100 °C
Dimensions: 5 x 11 x 18 mm
Termination Style: radial
Grid: 15

0,49 €

Jupiter M10C Midnight 10" / 50 W / 4 Ohm

The M10C has a slightly smoother sound that retains headroom. Similar to the 10LC but with less output but a more balanced sound with more presence and sparkle on the top end.
Initially intended for studio or home use, musicians claim it to be the closest to the original C10N from 4 and 5 decades ago.
The standard voice coil gives a more 3D presence when compared to a paper voice coil.

129,00 €

Resistor Metaloxide 2 Watts / 100 kOhms, Pack of 5

Resistor Metaloxide 2 Watts

+/- 5% tolerance
-55° C to 240° C operating range
Max 500 V
Excellent flame retardant coating
Different manufacturers
Pack of 5 pcs

Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm

0,95 €
0,19 € per Piece

Steel bar handle black, large

Steel bar handle, large

Steel, black powder-coated
Size: 273 x 162 mm
Cutout: 225 x 116 mm

8,00 €

Polypropylene Capacitor, axial, 630V, 0.47uF

MPW axial leaded metallized polypropylene film capacitors
Self Healing
Low ESR
Tolerance: +10% @ 1 kHz, 25°C
Peak, AC voltage (50/60 Hz): 630VDC / 250 VAC
Dielectric: Polypropylene
Coating: Flame Retardant Polyester tape wrap (UL510) with epoxy end fill (UL94V0)

2,70 €

Elektrolyt 100 µF @ 350V

Type: Electrolytic can capacitor
Capacitance: 100 µF
Voltage Rating: 350 V
Tolerance: - 20 % / +20 %
Operating Temperature Range: - 40°C / + 105 °C
Dimensions: Ø 18 mm x 36 mm
Termination Style: radial
Grid: 7,5

1,75 €

Polypropylene Capacitor, axial, 630V, 0.022uF

MPW axial leaded metallized polypropylene film capacitors
Self Healing
Low ESR
Tolerance: +10% @ 1 kHz, 25°C
Peak, AC voltage (50/60 Hz): 630VDC / 250 VAC
Dielectric: Polypropylene
Coating: Flame Retardant Polyester tape wrap (UL510) with epoxy end fill (UL94V0)