Cagenut / Screw Mounting kit M6

TT-Chassis Aluminium - Typ 040

Chassis for the PX18/PI18 kit, fits in all of our Standard Smallhead and 18W Headcabs and Combos

• Size : 430 x 170 x 65 mm
• Material: 2 mm Aluminium
• Made in Germany
• fits Alpha 3/8" Potentiometer (Intemnumber p38-*)
• Mounting: with cage nuts (not included)

• Size: 365 x 160 x 65 mm
• 2 mm Aluminium
• Made in Germany
• Mounting: with cage nuts (not included)
• With two cutouts for power plug

Alu chassis for TT66-Mk2 amp kit and similar amps.
2019-Version with the same size as the 18 Watts Smallhead Chassis. Fits into all of our Smallheads, 18Watt-Heads and CH001 headcabs.

• Size: 430 x 170 x 65 mm
• Material: 2 mm Aluminium
• Mounting: with cage nuts (not included)
• Protcetion Foil Outside

• U-Shape Chassis
• Version 2020 U
• Size: 480 x 160 x 65 mm
• Material: 2 mm Aluminium
• Made in Germany
• Mounting: with cage nuts (not included)

• Version 2020
• Size: 285 x 167 x 60 mm
• Mounting: with cage nuts (not included)
• Material: 2 mm Aluminium (AlMg3)
• Made in Germany
• Mounting: with cage nuts (not included)

• TT-Chassis Dumble ODS 50 Watt Style
• Size: 490 x 204 x 65 mm
• Material: 1,5 mm Steel
• Mounting: with cage nuts (not included)
• Made in Germany

Aluminium Chassis 035 closed,  TReverb Style XXL

• 2 mm Aluminium
• Size (W x D x H): 471 x 193 x 60 mm
• predrilled
• 3 x noval, 1 x octal
• Universal, TReverb Style XXL
• Mounting: with cage nuts (not included)

Same as the Chassis 040 - PX18 but with with octal sockets for the powertubes, fits in all of our Standard Smallhead and 18W Headcabs and Combos

• Size : 432 x 170 x 65 mm
• Material: 2 mm Aluminium
• Mounting: with cage nuts (not included)

Aluminium chassis based on the YAH100 chassis, but without cut-outs, drillings etc.

• Size: 483 x 238 x 70 mm
• Material: 2 mm AlMg3
• Reinforced corner joints
• Net Weight ca. 1,4 kg
• Mounting: with cage nuts (not included)
• Made in Germany

• TT-Chassis SLO-100 style
• Size: 560 x 190 x 70 mm
• Material: 1,5 mm Steel
• Mounting: with cage nuts (not included)
• Made in Germany

• Marshall 18 Watt Style Chassis - 1974
• for use in a combo
• Size: (WxHxD) 530 x 65 x 152 mm
• Material: 2 mm Aluminium (AllMg3)
• Mounting: with cage nuts (not included)

• Extended JTM45 Chassis
• Size: (WxHxD) 432 x 63 x 170 mm
• PT cut-out: 70 x 69 mm
• Material: 1,5 mm Steel, galvanize
• Made in Germany

• Size: 445 x 220 x 58 mm - Matchless DC30 Style
• 2 mm Aluminium
• Mounting: with cage nuts (not included)
• Made in Germany

Tube-Town Marshall Style18 Watt Chassis

• Size: (WxHxD) 432 x 170 x 65 mm
• Material: 2 mm Aluminium (AllMg3)
• reinforced corners (V2020 and above)

This chassis is based on a regular HiWatt chassis which was used for amplifiers up to 100 Watt. The chassis was adapted and optimized for the YAH100 kit but get used for other HiWatt Clones too.

• Size: 483 x 238 x 70 mm
• Material: 1,5 mm Steel
• hot zinc dipped
• Reinforced corner joints
• Made in Germany
• Mounting: with cage nuts (not included)

• Mini, Layout Type B, Version 2020
• Size: 285 x 165 x 60 mm
• Mounting: with cage nuts (not included)
• Material: 2 mm Aluminium (AlMg3)
• Made in Germany
• Mounting: with cage nuts (not included)

Aluminium Chassis 054

• Version 2020 / U-Type
• 2 mm Aluminium
• Just like the Chassis 030 but without drills and cutouts, except cutout for powersocket
• With protective foil on the outside
• Made in Germany
• Mounting: with cage nuts (not included)

• TT-Chassis SLO-100 style
• Size: 560 x 190 x 70 mm
• Material: 1,5 mm Steel
• Mounting: with cage nuts (not included)
• Made in Germany

• Type: Chickenhead
• Material: Phenolic
• Shaft Size: 6 - 6,3 mm
• Size: 32 x 13,7 mm
• Mounting: Set-Screw

• Marshall Style
• Heavy Duty
• Plastic covered with steel inner core
• Black
• Screws and t-nuts included

• Reissue Made in Russia

• Type: Chickenhead
• Material: Phenolic
• Shaft Size: 6 - 6,3 mm
• Size: 32 x 13,7 mm
• Mounting: Set-Screw