Main page » Components » Potentiometer » Fender Potentiometer » Fender Blues Junior 1 MOhm log - Volume Control

Fender Blues Junior 1 MOhm log - Volume Control

Product No.:: fe004-9401
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: piece
RoHs:: conform
Weight:: 0.01 kg per piece

4,85 €

incl. VAT excl. Shipping costs

piece:

Bookmark

Ask Question

Description

Fender Blues Junior Potentiometer
Fender#: 004-9401-000

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Customers who bought this product bought also the following products:

Resistor Metaloxide 5 Watts / 220 Ohms / Small Size

Metal Oxide Film Resistors

Termination Style: Axial
Power Rating: 5 W
Tolerance: 5 %
Temperature Coefficient: 350 PPM / C
Operating Temperature min/max: - 55 C / + 155 C

1,20 €

Bulb 6,3 Volt / #47 Base BA9s

for Fender Pilot-Light

BA9s
#47
6,3 V

0,70 €

Spring Retainer EL84

Spring Retainer EL84 / ELL844 and tubes with a similar size

0,95 €

Resistor Metaloxide 2 Watts / 22 kOhms

Resistor Metaloxide 2 Watts

+/- 5% tolerance
-55° C to 240° C operating range
Max 500 V
Excellent flame retardant coating
Different manufacturers

Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm

0,20 €

Elektrolyt 220 µF @ 63V

Type: Electrolytic can capacitor
Capacitance: 220 µF
Voltage Rating: 63 V
Tolerance: - 20 % / +20 %
Operating Temperature Range: - 40°C / + 105 °C
Dimensions: Ø 10 mm x 19 mm
Termination Style: radial
Grid: 5

0,25 €

Silicon Tube Damper for 12AX7, EL84

Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.