Main page » Components » Potentiometer » Guitar Potentiometer » Fender Poti 500k Guitar Split Shaft

Fender Poti 500k Guitar Split Shaft

Product No.:: fe099-0834
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: 2 piece
RoHs:: conform
Weight:: 0.029 kg per piece

10,00 €

incl. VAT excl. Shipping costs

piece:

Bookmark

Ask Question

Description

Fender Guitar Potentiometer split shaft
incl. nuts and washers and capacitors

Information about the manufacturer

Herstellerinformationen | Manufacturer Information
Fender Musical Instruments Europe GmbH
Königsallee 80
40549 Düsseldorf
Germany
http://www.fender.com/

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Customers who bought this product bought also the following products:

JJ EL84 / 6BQ5 Red Label - QUARTETT

4 tubes, matched as quad

JJ EL84 / 6BQ5 Red Label

67,00 €
16,75 € per Piece

Hammond 125B Universal

Audio: 5 W
Max. DC: 45 mA
Pri. Inductance: 8,97 H

51,80 €

Resistor Metaloxide 5 Watts / 270 Ohms / Small Size

Metal Oxide Film Resistors

Termination Style: Axial
Resistance: 100 Ohms
Power Rating: 5 W
Tolerance: 5 %

0,55 €

Resistor Metaloxide 2 Watts / 470 Ohms

Resistor Metaloxide 2 Watts

+/- 5% tolerance
-55° C to 240° C operating range
Max 500 V
Excellent flame retardant coating
Different manufacturers

Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm

0,20 €

Potentiometer für Marshall JCM900, 1 MOhm Log

Replacement potentiometer for Marshall JCM900, JCM600 and Valvestate 8XXX-Series
16 mm Body, Splitt Shaft, PCB

0,95 €

Resistor Metaloxide 2 Watts / 560 Ohms

Resistor Metaloxide 2 Watts

+/- 5% tolerance
-55° C to 240° C operating range
Max 500 V
Excellent flame retardant coating
Different manufacturers

Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm

0,20 €

Hammond 1750A 125A20B / 022921 for Fender Reverb

Reverb Driver 125A20B / 022921 Single-Ended, 3,5 Watt.

36,50 €

Carbonfilm Resistor 3.9k / 1 Watt - Pack of 5

Carbonfilm Resistor - Pack of 5

Low noise, small size, high power rating
Power: 1 Watt
Voltag: 500 V working / 1000 V overload

0,80 €
0,16 € per Piece

Elektrolyt 220 µF @ 450V

Type: Electrolytic can capacitor
Capacitance: 220 µF
Voltage Rating: 450 V
Tolerance: - 20 % / +20 %
Operating Temperature Range: - 40°C / + 105 °C
Dimensions: Ø 30 mm x 35 mm
Termination Style: radial, Snap-In

5,20 €

JJ EL34 Version II - QUAD

4 tubes, matched as quad

EL34 II has fuller low mids and low end but does not lose headroom in the high end. Stronger than regular JJ EL34 but not as aggressive as the JJ E34L.

96,00 €
24,00 € per Piece

Tube-Town EZ-Board 60 x 300 FR4 2 mm, black

Drills: 6 x 30
Size: 60 x 300 mm
Material: 2 mm
No drilling needed! Ready for use.

6,95 €

Roederstein MKT 1813 0,0047µF / 630 V DC

Type: Metalized Polyester Film Capacitors (PET)
Voltage Rating: 630 V DC / 220 V AC
Tolerance: +/- 10%
Operating Temperature Range: - 55°C / + 100 °C
Termination Style: axial

1,50 €

Elektrolyt 100 µF @ 450V

Type: Electrolytic can capacitor
Capacitance: 100 µF
Voltage Rating: 450 V
Tolerance: - 20 % / +20 %
Operating Temperature Range: - 40°C / + 105 °C
Dimensions: Ø 22 mm x 41 mm
Termination Style: radial
Grid: 10

5,00 €

Power Jack IEC320 / C14 w/ fuseholder, Snap-in

Power Jack with built-infuse holders 5.0 x 20 mm
Housing: polyamide
for snap-on mounting
Double-pole + protective ground 10 A / 250 V
single-pole fusing with bridge to the fuse holder at the L terminal
fuse holder terminals for soldering
Design to IEC/EN 60320-1

1,75 €

Custom Shop Faceplate PRO REVERSE - GLOSSY

Custom Shop Faceplate, Acryl reverse, laser engraved, 1,5 mm, different sizes, glossy. The engraved surface becomes transparent and must then be filled with paint.

This is a Custom-Shop Product. For configuration and order please scroll down the page.

21,35 €