Grillcloth British Large Chequerboard - 80 x 90 cm

• Type: Powerswitch, Marshall JCM Series
• Rating: 250 V AC @ 20 A
• Version: DPST, ON-OFF
• Recess: 28.5 x 23 mm, Snap-in mount
• Termination Style: solder-lugs, quick connect terminals

Universal size for 12" speakers
Dome diameter: 120 mm - recommended for guitar loudspeaker with massive beaming and higain sounds

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

Universal size for 12" speakers
Dome diameter:  80 mm
This version is only suitable for loudspeakers which are

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

Power Jack, Chassis mount

• Schurter 6162.0046
• Ratings IEC: 10 A / 250 VAC; 50 Hz
• Ratings UL/CSA: 15 A / 250 VAC; 60 Hz
• Dielectric Strength:    
  • > 3 kVAC between L-N
  • > 1.5 kVAC between L/N-PE (1 min/50 Hz)
• Allowable Operation Temp.:-25 °C to 70 °C
• Degree of Protection: from front side IP 20 acc. to IEC 60529
• Protection Class:Suitable for appliances with protection class 1 acc. to IEC 61140
• Material: Housing PA6, black, UL 94V-0

• Material: Steel
• Strength class: 4.8
• Surface: nickel-plated
• DIN: 966
• ISO: 7047

• with one fuse holders 5.0 x 20 mm
• Housing: polyamide
• for panel mounting
• IEC320 / C14
• Double-pole + protective ground 10 A/250 V
• single-pole fusing with bridge to the fuse holder at the L terminal
• fuse holder terminals for soldering

• Type: Countersunk raised head with cross recess
• Material: Steel
• Strength class: 4.8
• Surface: silver
• Price: per pcs.