Main page » Chassis-Shop » Chassis Hammond » Hammond 1550 Series » Hammond Diecast 1550B - 115 x 64 x 26 mm

Hammond Diecast 1550B - 115 x 64 x 26 mm

Mobile Preview: Hammond Diecast 1550B - 115 x 64 x 26 mm

Hammond Diecast 1550B - 115 x 64 x 26 mm

Product No.:: ha1550b
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: piece
RoHs:: conform
Weight:: 0.12 kg per piece

6,90 €

incl. VAT excl. Shipping costs

piece:

Bookmark

Ask Question

Description

Size: 115 x 64 x 26 mm
Color: Natural

Files:

Datasheet

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Customers who bought this product bought also the following products:

Hammond 1760H for Fender Outputtransformer 125A1A / 022640 UPGRADE Deluxe

Output Transformer 125A1A / 022640 Push-Pull for Deluxe, Deluxe Reverb, 20 Watt.

73,30 €

Wire Silicon Set #05, mixed

Insulation: Silicon
Operation Voltage Uo/U: 300 / 300 V AC

4,75 €
0,59 € per m

Signal wire LiYDY 1 x 0,5 mm², shielded - 2 m

Signal wire LiYDY 1 x 0,5 mm², shielded
Voltage Rating max: 250 V
Length: 2 m

2,20 €
1,10 € per m

Socket Noval Ceramic, Chassis w/ Shield - Pack of 5

Noval Socket - Pack of 5

Ceramic
Chassis mount with shield
Termination Style: solder lugs
for Tube Type: 12AX7, 12AT7, 12AU7 etc.

6,80 €
1,36 € per Piece

JJ 6V6 Red Labe - PAIR

2 tubes, matched as pair

The 6V6 S is a beam power pentode with octal base and a maximum plate dissipation of 14W. It has fat low end and full mid tones with very good tone separation and a smooth, clean high end - in general, a very balanced tone.
Currently, the only new production 6V6 which is approved for up to 500V anode voltage in pentode operation.

Tip: For use in combos, we recommend the JJ 6V6 Double Mica. It features a reinforced suspension of the system to avoid vibrations.

46,40 €
23,20 € per Piece

Miniatur-Potentiometer 10 k laydown PT15

Resistance: 10k Ohm
Power: 0,25 W
Max Voltage: 250 V
Grid 12,5/10 mm
Ø: 15,0 mm
h: 7,0 mm

0,95 €

Miniatur-Potentiometer 25 k laydown PT15

Resistance: 25k Ohm
Power: 0,25 W
Max Voltage: 250 V
Grid 12,5/10 mm
Ø: 15,0 mm
h: 7,0 mm

0,55 €

Alpha 1 MOhm log / Audio

Power Rating: 0,25 W
Voltage Rating: 250 V AC
Tolerance: 20%
Shaft: 6,35 mm, Solid Shaft

1,30 €

Tube-Town EZ-Board Single Relais PCB

2 - Layer
1,5 mm, black
Size: 21 x 35 mm
For the use with Finder Relais type 30.22.9xx (or relais with similar pin layout).

0,40 €

Fuseholder 5 x 20 mm, black

Rated voltage: 250 VAC
Rated current: 10 A (VDE), 16 A (UL/CSA)

0,75 €

Toggle Switch APEM 631 H/2 SPST - ON-OFF

Type: Toggle Switch
Version: SPST, ON - OFF
Rating: 15A / 250VAC, 10A / 400VAC
Contact resistance: 10 mΩ max. at 1A 2VDC
Insulation resistance: 1.000 MΩ min. at 500VDC
Dielectric strength: 2.000 Vrms 50 Hz min.
Operating Life: 10.000 cycles at full load
Termination Style: solder lug / quick-connect terminals

5,80 €

Fuse 2 A slow blow, Pack of 10

Rated Voltage: 250 VAC
Contact caps: nickel-plated brass
Size: Ø 5 mm x 20 mm
Pack of 10

1,55 €

Toggle Switch APEM 641 H/2 DPST - ON-OFF

Type: Toggle Switch
Version:DPST, ON - OFF
Rating: 15A / 250VAC, 10A / 400VAC
Contact resistance: 10 mΩ max. at 1A 2VDC
Insulation resistance: 1.000 MΩ min. at 500VDC
Dielectric strength: 2.000 Vrms 50 Hz min.
Operating Life: 10.000 cycles at full load
Termination Style: solder lug / quick-connect terminals

7,65 €

Rotary Switch 1-Pol / 3-Pos - 4 A @ 250VAC - Impedance / Voltage Selector

High Power Rotary Switch - Can be used as Voltage or Impedance selector

1 pole / 3 position
Solder lugs
Shaft Diameter 6 mm, D-Shaft
Rating: 250 VAC 6(4) A
Contact Resistance: 100MOhm Max
Dielectric Intensity:
- 1500VAC / 5S for terminal and terminal
- 3000VAC / 5s for terminal and ground
Withstand Voltage: 1500VAC / min
Operating Temperature: -25~85°C
Insulation Resistance: 500 VDC, 100MOhm Min
Electrical Life: 10,000 cycles
Housing material: PA66
Ø: 22 mm
h: 17,0 mm
Ø Frontpanel drill: 10 mm

1,00 €

Label "Impedance", round, black

Material: 1.5 mm transply
Ø-Outside: 42 mm
Color: Black
Letters: White

0,99 €