Main page » New products

New product

Tolex Mesa-Boogie Style Black - 3 Meter - B-STOCK

B-Stock Item: The surface may have minimal discoloration in some areas, but it is only noticeable upon close inspection.

Size:

Width approx. 115 cm
Length: 3 m

Color representation may vary depending on the computer monitor

Old price: 71,10 €
Only 39,80 €
11,54 € per m²

Offer valid until: 31.01.2025"

Spacer Bolt polyamide M3 / 10 mm, inner / outer thread - Pack of 6

Hexagon spacer bolts
inner thread - outer thread
Thread size: M3
Internal thread: 7,5 mm
External thread: 8 mm
Material: polyamide
Length: 10 mm
Colour: black
Pack of 6

1,20 €
0,20 € per Piece

Neutrik NMJ4HCD2 - 6,3 mm Mono switched, PCB

1/4" mono jack, switched, with straight PCB pins
Mounting nut included

Wide body and extremely durable contacts
Mates with all mono A-gauge plugs acc. EIA RS-453 standard

1,50 €

Toggle Switch DPDT - 2 position ON-ON, 10 A

The SCI R13-29B is a high current DPDT toggle switch (double pole double throw), designed for use in high current applications.

5,50 €

Switchcraft RCA plug 3501MX

Switchcraft 2 conductor RCA straight plug, accomodates cable up to 0.125" (3.18mm) diameter

1,65 €

Faceplate for TT Amp-Kit AC18 - Gold

Faceplate for TT kit AC18
Color: #LG10 gold / black
Material: 1.5 mm Transply
Front and rear panel

26,80 €

Jupiter M10C Midnight 10" / 50 W / 16 Ohm

The M10C has a slightly smoother sound that retains headroom. Similar to the 10LC but with less output but a more balanced sound with more presence and sparkle on the top end.
Initially intended for studio or home use, musicians claim it to be the closest to the original C10N from 4 and 5 decades ago.
The standard voice coil gives a more 3D presence when compared to a paper voice coil.

129,00 €

Spacer Bolt M3 / 10 mm - Pack of 4

1x internal and 1x external thread
Thread size: M3
External thread: 6.0 mm
Internal thread: 6.0 mm
Material: galvanised steel
Length: 10 mm
Pack of 4

1,09 €
0,27 € per Piece

Belton Oktal Sockel VTB8-PTS, PCB, black

Octal Socket Belton VTB8-PTS

High quality Micalex socket
Print / PCB mount
Glassfiber filled PPS black body
for Tube Type: EL34, E34L, 6L6, 6V6, 6550, KT66/77/88 etc.

2,65 €

Socket Octal Belton, Chassis VTB8, black

Octal Socket Belton VTB8

High quality Micalex socket
Glassfiber filled PPS black body
Chassis mount
Termination Style: solder lugs
for Tube Type: EL34, E34L, 6L6, 6V6, 6550, KT66/77/88 etc.

2,55 €

TTC Combo 112 Dumble Style - Black / Black

Specifications

Dumble Style Combo, based upon the original specs.

Size: 530 x 530 x 260 mm
Tolex: Fender Style black
Grillcloth: Fender Style black
Hardware: Silver
Back: Oval-Back
Weight: ca. 13 kg
Speaker: None
Wood: 18 mm Poplar Plywood

495,00 €

Socket Noval Belton, Print VTB9-PT, black

Noval Socket Belton VTB9-PT

Version: High quality Micalex socket
Glassfiber filled PPS black body
Termination Style: print / pcb mount
for Tube Type: 12AX7, 12AT7, 12AU7, EL84, EZ81, EL844 etc.

1,80 €

JJ 6V6 Red Labe - SINGLE - Double Mica Special Edition

Single tube, not matched

JJ 6V6 Double Mica double-layered mica in the upper part of the tube. This stabilizes the tube system and significantly reduces possible vibrations that can occur due to heavy mechanical stress. This version of the JJ 6V6 was specifically designed for use in combo amplifiers.

The JJ6V6 is a beam power pentode with octal base and a maximum plate dissipation of 14W. It has fat low end and full mid tones with very good tone separation and a smooth, clean high end - in general, a very balanced tone.
Currently, the only new production 6V6 which is approved for up to 500V anode voltage in pentode operation.

27,50 €

Fender® CTS Potentiometer Concentric 250kOhm/500kOhm log / Audio - Solid Shaft

Used for stacked volume controls on American Vintage '62 Jazz Bass® and Acoustasonic Telecaster®, and Nashville Power Telecaster® guitars

12,90 €

Fender CTS 250k Ohm Potentiometer, Solid Shaft, No Load

250K ohm log / audio
For use in most Stratocasters and Telecasters
Original CTS manufactured part
Includes capacitor
Comes in Fender® packaging
Solid shaft, d = 6,3 mm

11,90 €

Fender CTS 250k Ohm Potentiometer, Knurled Shaft, No Load

250K ohm
For use in most Stratocasters and Telecasters
Original CTS manufactured part
Includes capacitor
Comes in Fender® packaging

11,90 €

Hammond 290CAX - 230 V for Fender Universal 125P1B / 022772

Powertransformer for Champ, Vibro Champ, Princeton, Princeton Reverb, Tweed Deluxe
Fender Part Number 125P1B and 022772
Pri: Dual Voltage 115 or 230 V 50/60 Hz
Sec: 630 VAC or 550 VAC
Produced by Hammond for Tube-Town

106,00 €

JJ KT88 Red Label - SEXTETT

6 tubes, matched as sextett

A powerfull bass with crystal clear highs - this is the KT88 by JJ. This tubes works perfect with any kind of KT88 / 6550 amp

345,60 €
57,60 € per Piece

Cagenut (wide slot), M6, Pack of 4

Cagenut for 19" racks or chassis
Pack of 4 cagenuts

0,95 €
0,24 € per Piece

Metalfilm Resistor 680k Ohm / 1% / 0,5 W - Pack of 5

Metalfilm Resistor
Great for amps and effects, low noise, small size, high power rating

0,85 €
0,17 € per Piece