Main page » Components » Jacks & Plugs » Jack 6,3 mm » Rean NYS207 - 6,3 mm (1/4") phone plug, right angle, mono

Rean NYS207 - 6,3 mm (1/4") phone plug, right angle, mono

Mobile Preview: Rean NYS207 - 6,3 mm (1/4") phone plug, right angle, mono

Rean NYS207 - 6,3 mm (1/4") phone plug, right angle, mono

Product No.:: nys207
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: piece
RoHs:: conform
Weight:: 0.024 kg per piece

1,35 €

incl. VAT excl. Shipping costs

piece:

Description

Files:

Datasheet

Information about the manufacturer

Herstellerinformationen | Manufacturer Information
Neutrik EMEA GmbH
Marie-Curie-Strasse 2
85221 Dachau
Germany
eMail neutrik.emea.de@neutrikgroup.com

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Customers who bought this product bought also the following products:

Diode BY269

Fast Avalanche Sinterglass Diode

0,75 €

F+T 100 µF @ 500 Volt, axial

Type: Aluminum Electrolytic Capacitors
Capacitance: 100 µF
Voltage Rating: 500 V
Tolerance: +/- 20%
Operating Temperature Range: - 40°C / + 85 °C
Dimensions: Ø 30 mm x 49 mm
Termination Style: axial

6,95 €

Switchcraft 11, 6,3 mm jack, mono

6,3 mm jack
mono
Installation diameter: 10 mm

3,05 €

Speaker Cable MERIDIAN MOBIL SP215 - 2 x 1,5 mm², black - 20 Meter

2 x 1,50 mm²
PVC Ø 6,80 mm
black

39,95 €
2,00 € per m

Toggle Switch APEM 631 H/2 SPST - ON-OFF

Type: Toggle Switch
Version: SPST, ON - OFF
Rating: 15A / 250VAC, 10A / 400VAC
Contact resistance: 10 mΩ max. at 1A 2VDC
Insulation resistance: 1.000 MΩ min. at 500VDC
Dielectric strength: 2.000 Vrms 50 Hz min.
Operating Life: 10.000 cycles at full load
Termination Style: solder lug / quick-connect terminals

5,80 €

Rubber foot with steel insert 38 x 15 mm - Pack of 4

Rubber foot with steel insert
Size: d = 38 mm, h = 15 mm
Pack of 4
Screws included

2,60 €

Fuse 1.0 A slow blow, Pack of 10

Rated Voltage: 250 VAC
Contact caps: nickel-plated brass
Size: Ø 5 mm x 20 mm
Pack of 10

1,55 €

JJ 12AX7 / ECC83S V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

Sweet and warm sounding preamp tube with high gain.

21,90 €

TT-Chassis 008 - Dumble Standard - 490 x 200 x 65

Size: 490 x 200 x 65 mm (Dumble size)
Material: 2 mm Aluminium
Mounting: with cage nuts (not included)
reinforced Corners
With two cut-outs for power jacks
Made in Germany

28,90 €

EH 7025 (12AX7 / ECC83 HQ) - V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

Electro-Harmonix has released a low noise, low microphonic version of the 12AX7 that meets all specifications required for the tube to be designated 7025. The original 7025 tube was a 12AX7 that was tested and selected for the lowest noise and microphonics for use in the critical first preamp stages of amplifiers where noise and microphonics could be an issue. In order to ensure that the 7025 specification is consistently met, Electro-Harmonix has redesigned the structure of the 12AX7 and has implemented construction techniques to ensure the absolute lowest noise and microphonics possible. In all samples tested, noise and microphonics could not be detected.

The Electro-Harmonix 7025EH has a mid-range that gives clarity and definition to the sound and a smooth top end for warmth and balance. With these characteristics, along with the exceptionally low noise and low microphonics, the Electro-Harmonix 7025EH will work equally well in vintage and modern high-gain guitar amplifiers, as well as sensitive phono preamps.

27,80 €

Tung-Sol 7189 / EL84 Reissue - High Quality - PAIR

2 tubes, matched as pair

In 1959 Tung-Sol developed a premium, up-rated version of the 6BQ5/EL84 for use in industrial and military circuits. This tube was designated 7189. Due to its higher plate voltage rating and increased clean headroom, it became a favorite power tube for use in medium power stereo amplifiers and receivers made by H. H. Scott, Sherwood, Fisher, Lafayette, and many other hi-fi manufacturers. It was also used in high-end guitar amplifiers manufactured by Magnatone. Due to its increased ratings, it was considered as an upgrade for 6BQ5/EL84 amplifiers for increased performance and reliability.