Main page » Components » Resistors » Metal Oxide 1 W » Resistor Metaloxide 1 Watt / 1,2 kOhms

Resistor Metaloxide 1 Watt / 1,2 kOhms

Mobile Preview: Resistor Metaloxide 1 Watt / 1,2 kOhms

Resistor Metaloxide 1 Watt / 1,2 kOhms

Product No.:: rmo1-1k2
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: piece
RoHs:: conform
Weight:: 0.001 kg per piece
Minimum order:: 5

0,17 €

incl. VAT excl. Shipping costs

piece:

Bookmark

Ask Question

Description

Metaloxide film resistor

Information about the manufacturer

Herstellerinformationen | Manufacturer Information
VITROHM Holding GmbH
Ramskamp 70
25337 Elmshorn
Germany
http://www.vitrohm.com

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Customers who bought this product bought also the following products:

Polypropylene Capacitor, axial, 630V, 0.01uF

MPW axial leaded metallized polypropylene film capacitors
Self Healing
Low ESR
Tolerance: +10% @ 1 kHz, 25°C
Peak, AC voltage (50/60 Hz): 630VDC / 250 VAC
Dielectric: Polypropylene
Coating: Flame Retardant Polyester tape wrap (UL510) with epoxy end fill (UL94V0)

1,15 €

Polypropylen Capacitor, axial, 630V, 0.0047uF

MPW axial leaded metallized polypropylene film capacitors
Self Healing
Low ESR
Tolerance: +10% @ 1 kHz, 25°C
Peak, AC voltage (50/60 Hz): 630VDC / 250 VAC
Dielectric: Polypropylene
Coating: Flame Retardant Polyester tape wrap (UL510) with epoxy end fill (UL94V0)

1,45 €

Polypropylene Capacitor, axial, 630V, 0.0022uF

MPW axial leaded metallized polypropylene film capacitors
Self Healing
Low ESR
Tolerance: +10% @ 1 kHz, 25°C
Peak, AC voltage (50/60 Hz): 630VDC / 250 VAC
Dielectric: Polypropylene
Coating: Flame Retardant Polyester tape wrap (UL510) with epoxy end fill (UL94V0)

1,08 €

Polypropylen Capacitor, axial, 630V, 0.001uF

MPW axial leaded metallized polypropylene film capacitors
Self Healing
Low ESR
Tolerance: +10% @ 1 kHz, 25°C
Peak, AC voltage (50/60 Hz): 630VDC / 250 VAC
Dielectric: Polypropylene
Coating: Flame Retardant Polyester tape wrap (UL510) with epoxy end fill (UL94V0)

1,00 €

TT E83CC (12AX7 / ECC83 / 7025) - V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

Tube-Town E83CC Preamp-Tube

High-quality 12AX7 / ECC83 / 7025 preamp tube with low background noise and reduced feedback tendency due to short anode plates, as well as a powerful bass and a dense sound. Very suitable for input stages with high amplification or amplifiers with generally high gain.
Dropin replacement for all 12AX7, ECC83, 7025, and E83CC tubes.

25,90 €

TT 12AX7 / ECC83 Classic V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

The TT12AX7 impresses with its fine and detailed reproduction of the highs, which is maintained even at high amplification levels. Due to a higher H3 part, the TT12AX7 sounds significantly cleaner than many other 12AX7/ECC83 tubes, which makes the bass range appear much tighter. We therefore especially recommend this tube for styles such as clean, crunch, and metal, where high amplification and clear transparency are required.