Main page » Components » Resistors » Metal Oxide 2 W » Resistor Metaloxide 2 Watts / 15 kOhms

Resistor Metaloxide 2 Watts / 15 kOhms

Product No.:: rmo-15k-2
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: piece
RoHs:: conform
Weight:: 0.001 kg per piece

0,15 €

incl. VAT excl. Shipping costs

piece:

Bookmark

Ask Question

Description

Resistor Metaloxide 2 Watts

+/- 5% tolerance
-55° C to 240° C operating range
Max 500 V
Excellent flame retardant coating
Different manufacturers

Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm

Documents

VITROHM RMO1 RMO2 Datasheet (610.62 KB)

Information about the manufacturer

Herstellerinformationen | Manufacturer Information
VITROHM Holding GmbH
Ramskamp 70
25337 Elmshorn
Germany
http://www.vitrohm.com

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Customers who bought this product bought also the following products:

Resistor Metaloxide 5 Watts / 470 Ohms / Small Size

Metal Oxide Film Resistors

Termination Style: Axial
Resistance: 100 Ohms
Power Rating: 5 W
Tolerance: 5 %

0,80 €

Fuseholder 6,3x32 mm US-Type

Fuseholder, Chassismount, for 6,3 x 32 mm fuses,

US-Version
Drill Ø: 15 mm
10A@250VAC
15A@125VAC

1,25 €

Resistor Metaloxide 5 Watts / 3,3 kOhms / Small Size

Metal Oxide Film Resistors

Termination Style: Axial
Power Rating: 5 W
Tolerance: 5 %
Temperature Coefficient: 350 PPM / C
Operating Temperature min/max: - 55 C / + 155 C

1,10 €

Diode 1N4007 1A @ 1000 V, Pack of 10

Standard recovery rectifier
Voltage max: 1000V
Max. forward current: 1A
Pack of 10 pcs

0,73 €

JJ 12AT7 / ECC81

JJ's version of the ECC81/12AT7 tube type with a warm and soft sound.

14,80 €

Switchcraft 12a, 6,3 mm jack mono, switched

6,3 mm jack
mono, switched
Installation diameter: 10 mm

3,59 €

Carbonfilm Resistor 220k / 1 Watt, Pack of 5

Carbonfilm Resistor
Low noise, small size, high power rating
Power: 1 Watt
Voltag: 500 V working / 1000 V overload
Axial Leads
-55° C - 155° C
12 * 5 mm
RoHS

0,80 €
0,16 € per Piece

Bulb 6,3 Volt / #47 Base BA9s

for Fender Pilot-Light

BA9s
#47
6,3 V

0,70 €

Elektrolyt 47 µF @ 100 V

Type: Electrolytic capacitor
Capacitance: 47 µF
Voltage Rating: 100 V
Tolerance: - 20 % / +20 %
Operating Temperature Range: - 40°C / + 85 °C
Dimensions: Ø 8 mm x 18 mm
Termination Style: axial

1,90 €

Silicon Tube Damper for 12AX7, EL84

Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.

0,45 €

EH 6V6 - SINGLE

Single tube, not matched

Rugged and wonderful-sounding Power Beam tetrode that performs flawlessly at up to 475 volts. Great replacement for single-ended amps such as Fender Champ, or high plate voltage amps like the Fender Deluxe Reverb.