Main page » Speaker » by Size » 10" Guitar Speakers

10" Guitar Speakers

Vintage American Ceramic Guitar Speaker
10" seamed cone speaker with a small ceramic motor, an upgrade replacement for Jensen C10R.

89,00 €

incl. VAT excl. Shipping costs

piece:

Jupiter 10SC-P 10" / 15 W / 4 Ohm - Paper Coil

Vintage American Ceramic Guitar Speaker
10" seamed cone speaker with a small ceramic motor, an upgrade replacement for Jensen C10R.

89,00 €

incl. VAT excl. Shipping costs

piece:

Jupiter 10SC-P 10" / 15 W / 8 Ohm - Paper Coil

Vintage American Ceramic Guitar Speaker
10" seamed cone speaker with a small ceramic motor, an upgrade replacement for Jensen C10R.

89,00 €

incl. VAT excl. Shipping costs

piece:

Jupiter M10C Midnight 10" / 50 W / 16 Ohm

The M10C has a slightly smoother sound that retains headroom. Similar to the 10LC but with less output but a more balanced sound with more presence and sparkle on the top end.
Initially intended for studio or home use, musicians claim it to be the closest to the original C10N from 4 and 5 decades ago.
The standard voice coil gives a more 3D presence when compared to a paper voice coil.

129,00 €

incl. VAT excl. Shipping costs

piece:

Jupiter M10C Midnight 10" / 50 W / 4 Ohm

129,00 €

incl. VAT excl. Shipping costs

piece:

Jupiter M10C Midnight 10" / 50 W / 8 Ohm

129,00 €

incl. VAT excl. Shipping costs

piece:

Mojotone Anthem 10" / 35 W / 8 Ohm

A huge part of being a musician is being intentional about your work. This concept can apply to sound, songwriting, aesthetic, and even gear selection; which goes hand-in-hand with the philosophy behind our Anthem Series Speakers. Each speaker in our Anthem Series was purpose-built to optimize their overall power and functionality without compromising their finely-tuned classic American-voiced tone.
After hundreds of hours of research, parts selection, and testing, we’re confident we have outfitted each of these speaker baskets with their perfect paper, voice coil, and magnet counterparts. Straight-seamed ribbed cones, were chosen for their superior performance andunmatched tone, and top-shelf voice coils and magnets have been carefully paired to each of their respective speaker cone sizes.

79,00 €

incl. VAT excl. Shipping costs

piece:

Speaker Break-In Service

Speaker Break-In / Agin Service for Guitar Speakers.
Corresponds to a continuous operation of 24 hours.
Many new and unused loudspeakers sound harsh and must be used for a certain time to develop their sound. This ageing process can be accelerates with this service which "wears" different parts of the speaker, so it will sound softer and smoother, in particular the top end.

20,00 €

incl. VAT excl. Shipping costs

piece:

Tonespeak Boston 1020 10" / 20 W / 8 Ohm

Create your next signature sound with the Boston 10” guitar speaker. Spotlight your tone with a driver that delivers a warm, articulate bottom-end, scooped mids, and blooming highs.

This model includes a good old fashioned 1960’s style Alnico magnet assembly for an ultra-quick impulse response. The often-misunderstood magic of Alnico is that it partially and temporarily demagnetizes when you push them hard, applying a simple compression effect that adds a satisfying sense of sweetness that can't be beat.

109,00 €

incl. VAT excl. Shipping costs

piece:

Tonespeak Glasgow 10" / 50 W / 8 Ohm

In a nod to the great Scottish rock bands, the Glasgow 1050 is the perfect option for guitar players seeking a powerful leading sound at the forefront of any number. This driver's cone is a special, concentrically ribbed paper cone made by guitar-cone expert Kurt Müller, creating a tone profile of rich and warm lows, a balanced mid-range, and screaming highs.

Upgrade your tube amp with this high sensitivity replacement driver—a model sporting a large 35 oz ceramic magnet and a 1.75” voice coils used in the ToneSpeak 12” speakers—to pack your tone with plenty of punch.

99,00 €

incl. VAT excl. Shipping costs

piece:

Tonespeak Leeds 1020 10" / 20 W / 8 Ohm

Give your listeners a tailored response of a sharp and punchy bottom-end, scooped mids, and soaring highs--keeping you in the fray at the extremes while maintaining a nice sense of sweetness in the middle of your range.

This classic 10" guitar speaker delivers a vintage sound, thanks to an alnico magnet motor that softens the tone without losing the immediacy. In addition, a vintage Kurt Müller paper cone maintains a lush profile, full-bodied sound profile that compliments your playing.

109,00 €

incl. VAT excl. Shipping costs

piece:

Tonespeak Minneapolis 10" / 50 W / 8 Ohm

A broad response ideal for either lead or rhythm guitar, as well as deep range for dropped tuning, lets the Minneapolis breathe new life into your tone. An American made, purple paper cone (honoring our favorite local legend), is anchored into a robust steel basket, and delivers a strong and even tone for lows, mids, and highs.

This 10" model provides high sensitivity by using a high-power ferrite magnet and the same 1.75” voice coil used in the 12” ToneSpeak series; a perfect upgrade for anyone looking to add a little more oomph to their tube amp.

99,00 €

incl. VAT excl. Shipping costs

piece:

TT Converter 12 " to 10 "

You want to mount a 10" speaker but the cutout is made for a 12" Speaker ? No problem with this 12/10 Inch converter !

Material 6 mm Birch Plywood
Screws, nuts and washers included

24,90 €

incl. VAT excl. Shipping costs

piece:

TT Diffusor 10"

Universal size for 10" speakers
Dome diameter: 80 mm

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.