Tube-Town GmbH

• Size: ca. 120 x 90 cm (only available in this size)
• ORIGINAL USA PRODUCTION
• Material: 94 % Polypropylen, 6 % Acrylic
• Price per pcs.
• Actual shades may vary.

• FAQ Grillcloth

TT-Chassis Aluminium - Typ 040

Chassis for the PX18/PI18 kit, fits in all of our Standard Smallhead and 18W Headcabs and Combos

• Size : 430 x 170 x 65 mm
• Material: 2 mm Aluminium
• Made in Germany
• fits Alpha 3/8" Potentiometer (Intemnumber p38-*)
• Mounting: with cage nuts (not included)

• Datasheet

• Cabinet corner metal, large, black
• Internal radius: 12 mm

Cabinet corner leather dark brown, Set of 4
100 % real letaher, vegetable tanned
Caution: natural product ! The texture and thickness may vary.

Hint: put the corners into water for a few minuties before mounting. This makes them soft and elastic and than they will fit better.
The corners on the chassis should be well rounded too in order to achieve best results.

Backpanel for JCM800 and JCM900 headshells

• outer dimensions: ca. 685 x 180 mm
• zink-plated steel, 1,5 mm
• lightwight

TT-Chassis Aluminium - Typ 042

Chassis for the JC18 kit, fits in all of our Standard Smallhead and 18W Headcabs and Combos and of course the JC18 headshell

• Size : 432 x 170 x 65 mm
• Material: 2 mm Aluminium

• Datasheet

Universal Mono/Stereo Terminal, replacement for Marshall Terminal ME-19605000 which is used in 2X12 or 4X12 Marshall speaker cabs, with extended connections and possibilities. For the used with a 4X12 a second wireset is needed to connect two speakers in parallel. Please see the list with recommended products.

If used with this speakers

• 2 x 8 Ohms or
• 4 x 16 Ohms or
• 4 x 4 Ohm

• 4 ohm mono
• 8 ohm left + 8 ohm right stereo
• 8 ohm left only mono
• 8 ohm right only mono
• 16 ohm mono

Colorcodes:

• black: L-
• red: L +
• green: R -
• white: R +

Files:

• Datasheet

• Power: 150 W RMS
• Damping: 0 - 100%
• Impedance: 4, 8, 16 Ohm
• Range-Select
• Lin/Log Switch
• Line-Out
• Size: ca. (H x W x D) 133 x 210 x 148 mm

Please note: The PoS is a resistive attenuator, which is used for power reduction and is connected between amplifier output and loudspeaker cabinet. It is NOT a reactive load. For this purpose the Tone-Hound must be used.

The schematic and layout plan for this kit will be sent by email together with the invoice, usually on the same day the order is sent.

A customer has made a recording with his Marshall and PoS100 and has put it online. You can see the video on YouTube.

FAQ: Can I use the PoS150 as dummy-load ?
Yes, but you must connect a "load" to the PoS150. This must NOT be a speaker-cab ! Just use a power resistor with 8 Ohm, mount it onto a heatsink and connect it with a jack than you can use the PoS as a Dummy-Load too.

Files:

• Datasheet (EN)

• for easy monting of the LED resistor
• LED already connected with the switch