Tube-Town GmbH

• Material: Phenolic
• Hard edge
• Shaft Size: 6 - 6,3 mm
• Size: 19 x 14,5 mm
• Mounting: Hexagon Set Screw

• Type: Rocker Switch
• Version: DPST  ON-OFF, Lighted yellow, labeled I/O
• Recess: 30 x 22 mm, Snap-in mount
• Rating: max. 16A/250V AC
• Termination Style: solder lug / quick-connect terminals

Custom Shop Faceplate, Transply, laser engraved, different sizes.

This is a Custom-Shop Product. For configuration and order please scroll down the page.

• with one fuse holders 5.0 x 20 mm
• Housing: polyamide
• for panel mounting
• IEC320 / C14
• Double-pole + protective ground 10 A/250 V
• single-pole fusing with bridge to the fuse holder at the L terminal
• fuse holder terminals for soldering

• for Fender Pilot-Light
• 12 V DC
• LED, white
• BAS9S

• Rotary impedance selector, 4/8/16
• Body screws onto chassis hole
• SP3T switch.

• Drills: 6 x 30
• Size: 60 x 300 mm
• Material: 2 mm
• No drilling needed! Ready for use.

• Material: Phenolic
• Shaft Size: 6 mm, knurled
• Size: 19,5 x 15,3 mm
• Mounting: Push-On, no D-Shaft

• Material: Phenolic
• Shaft Size: 6 mm, knurled
• Size: 19,5 x 15,3 mm
• Mounting: Push-On, no D-Shaft

• Material: Phenolic
• Shaft Size: 6 - 6,3 mm
• Size: 19 x 14,5 mm
• Mounting: Hexagon Set Screw

• Type: Footswitch
• Version: 3PDT
• Rating: 2A / 250VAC, 4A / 125VAC
• Termination Style: solder-lugs
• LED ring
• LED colour: red
• LED: U=2,2 - 2,4V, I = ca. 7-10mA
• Mounting hole: 17,2 mm
• Lifetime: > 10000 cycles
• without cap

• Type: Footswitch
• Version: 3PDT
• Rating: 2A / 250VAC, 4A / 125VAC
• Termination Style: solder-lugs
• LED ring
• LED colour: red
• LED: U=2,2 - 2,4V, I = ca. 7-10mA
• Mounting hole: 17,2 mm
• Lifetime: > 10000 cycles
• without cap

HiWatt Style Outputtransformer, Dropin-Replacement

• Primary: 1,2 kOhm (for 6 x EL34)
• Secondary: 4, 8 and 16 Ohm
• Re: 20,5 Ohm
• Primary induction: 116 H @ 240 V 50 Hz
• Power: 250 Watt
• Made in Europe

Files:

• Datasheet

• Material: Phenolic
• Shaft Size: 6 - 6,3 mm
• Size: 19 x 14,5 mm
• Mounting: Hexagon Set Screw

Tube-Town EZ-Board #081

• Drills: 2 x 30
• Size: 20 x 300 mm
• Diameter drill: 2,65 mm
• Material: 2 mm
• No drilling needed! Ready for use.

The EZ-Board an be used as an Eyelett-Board without the need to install any Eyeletts or it can be used with Turrets type 1509-4 or TT Type 32.

• Mini jack plug 3.5 mm stereo
• Nickel-plated
• Bend protection