Main page » Speaker » by manufacturers » Warehouse Guitar Speakers » WGS Veteran 10 10" / 20 W / 8 Ohm

Preview: WGS Veteran 10 10" / 20 W / 8 Ohm

WGS Veteran 10 10" / 20 W / 8 Ohm

Mobile Preview: WGS Veteran 10 10" / 20 W / 8 Ohm

Description

The 10” Veteran™ speaker from WGS™ has great crunchy cone breakup and clean, warm overtones. The seamed paper cone is key to this guitar speaker's sound.

Thiele-Small Parameters (for 8 Ohms speaker)

Resonant Frequency (Fs): 110.86 Hz
DC Resistance (Re): 6.9 Ohm
Coil Inductance (Le): 8 mH
Mechanical Q (Qms): 17.2304
Electromagnetic Q (Qes): 1.9694
Total Q (Qts): 1.7674
Compliance Equiv. Vol. (Vas): 0.808 cu ft
Mech. Compliance of Susp. (Cms): 119.122 mm/N
BL Product (BL): 6.15 T-M
Diaphragm Mass Inc. Airload (Mms): 17.3021 grams
Surface Area of Cone (Sd): 366.0962 cm squared
Sound Pressure Level (spl): 93.84 db

Manufacturer

Hersteller / Verantwortliche Person EU

Customer reviews (5)

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Lars Gunnar H., 11/30/2024

This is the most musical 10" speaker I ever had :)
Tight bottom, great mids, and silky smooth highs; it performs absolutely fantastic in my homegrown fender Deluxe reverb "Champ" (deluxe reverb preamp and single ended 6v6 poweramp as in the champ)

All the frequencies and all the details are there: It really brings out the best of my Strats :)

Great speaker, very inspiring sound to work with:) homegrown fender Deluxe reverb "Champ" (deluxe reverb preamp and single ended 6v6 poweramp as in the champ)

All the frequencies and all the details are there: It really brings out the best of my Strats :)

Great speaker, very inspiring sound to work with:)
go to post
Arne, 01/28/2013

The most vintage sounding new speaker for blues harp i heard. It have the crunchy bottom and great mod and smooth edge. Just as good for a small SE amp as in a Bassman. I have 2 in my 35watt bassman-ish amp and it blows my and the crowds head off. The price is good as well. amp as in a Bassman. I have 2 in my 35watt bassman-ish amp and it blows my and the crowds head off. The price is good as well.
go to post

Recommended products:

TT Diffusor 12" - Standard

Universal size for 12" speakers
Dome diameter: 80 mm - recommended for most of the guitar loudspeaker with average beaming

As the frequency increases, the radiation of a loudspeaker is increasingly focused on its center. If the listener is in this beam, the sound is extremely harsh and biting; if one moves to the side of it, the sound becomes significantly darker and treble components are partially missing.
To reduce this behavior, a diffuser is used. This sits directly in the beam of the speaker and deflects the high frequencies very strongly, it breaks the "beam". This makes the sound much fuller and more balanced.

Hear the Diffusor in action on ->YouTube (made by one of our customers, Thanks !)

15,85 €

Wiring Harness, mono, for Loudspeaker / 1

Wiring harness for internal speaker connection
Number of speakers: 1
Type: Mono
Wire: 2 x 1,5 mm² red - black
Jack socket / speaker crimps
Length: ca. 55 cm

12,50 €

Speaker cable, 2 x 6,3 mm plug, 0,5 m

TT Cable Speaker Cable

Length: 0,5 m
Color: grey
1st Jack: Mono 6,3 mm
2nd Jack: Mono 6,3 mm
Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grey (#so415-0056)

7,50 €

Speaker Break-In Service

Speaker Break-In / Agin Service for Guitar Speakers.
Corresponds to a continuous operation of 24 hours.
Many new and unused loudspeakers sound harsh and must be used for a certain time to develop their sound. This ageing process can be accelerates with this service which "wears" different parts of the speaker, so it will sound softer and smoother, in particular the top end.

[content:3210136]

20,00 €

Wiring Harness, mono, for Loudspeakers / 2

Wire Set for internal speaker connection
Number of speakers: 2
Type: Mono, parallel and serial
Wire: 2 x 1,5 mm² red - black
Jack socket / speaker crimps
Length each ca. 55 cm

16,80 €

Speaker cable, 2 x 6,3 mm plug, 3 m

Speaker-Cable

Length: 3 m
Color: grey
1st Jack: Mono 6,3 mm
2nd Jack: Mono 6,3 mm
Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grau (#so415-0056)

9,90 €

scr307

Screw set for loudspeaker mounting

4 x Screw M5x20mm
4 x Washer M5
4 x T-Nut M5

1,48 €

Wiring Harness, mono, speaker crimps

Wiring Harness, mono, speaker crimps
Wire: 2 x 1,5 mm² red - black
Speaker Crimps on both sides
Length: ca. 55 cm

5,90 €

Speaker cable, 2 x 6,3 mm plug, 0,5 m - black

TT Cable Speaker Cable

Length: 0,5 m
Color: black
1st Jack: Mono 6,3 mm (red)
2nd Jack: Mono 6,3 mm (red)
Cable type: Sommer Cable Typ SC-MERIDIAN SP215 2 x 1,5 mm², grey (#so415-0056)

7,50 €

Customers who bought this product bought also the following products:

Mallory 150's 0,1 µF / 630 VDC

Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.

Epoxy end fill meets UL94V-0
Non inductively wound
Flame retardant outer wrap meets UL510
Non polar

Specifications:

Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
Self Inductance: 1 nH max. per 1 mm lead and body length
Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
Damp Heat Test: 95% RH @ +45 ºC for 21 days
Soldering: 260 ºC ±5 ºC for 10 s ±1 s
Long Term Storage Stability: ?C/C = ±3% after 2 years

Color can differ from the picture.

3,10 €

Speaker Cable MERIDIAN MOBIL SP215 - 2 x 1,5 mm², black - 10 Meter

Were raw force reigns...

the sound technicians are at work and do not have the time to handle cables with tender love and care. This robust cable is especially intended for speakers and satifies all special technical demands. The oxygen-free copper strand provides better sound and more durability.
All PVC-versions are easy to wind. Versions SP215 and SP225 are now available with highly flexible 0.15 mm copper stranding!
New are the versions in FRNC and E30 (IEC 228, IEC 332-/1, IEC 332-3 Cat C, IEC 60331, IEC 61034-1/2, IEC 60754-2)

THE ADVANTAGES:

Flexible and easily windable
Small diameter
Great durability through the use of a special jacket mixture
Very affordable

THE APPLICATION:

All types of sound systems
For fixed installation
Wiring of HiFi-systems

TECHNICAL DATA:

Construction (2LIY1.50mm²)Y
Diameter 6,8 mm
AWG 16
No. of conductors 2 x 1,5 mm²
Jacket material, insulation PVC
Copper strand per conductor 84 x 0,15 mm
Conductor insulation, diameter 2,62 mm
Temperature range min. -30 °C
Temperature range max. 70 °C
Fire load per m 0,28 kWh
Weight per 1 m 78 g
Color black

ELECTRICAL DATA:

Capac. cond./cond. per 1 m 150 pF
Cond. resistance per 1 km < 13 Ohm
Insulat. resistance per 1 km > 5 MOhm

19,95 €
2,00 € per m