Z-Diode BZX85 C18
Z-Diode BZX85 C18
Z-Diode BZX85 C18

Z-Diode BZX85 C18

Product No.:
bzx85-c18
In stock for immediate delivery. Delivery time depends on the destination country* In stock for immediate delivery. Delivery time depends on the destination country*
RoHs:
conform
Weight:
0.001 kg per piece
0,30 €

incl. VAT excl. Shipping costs

Bookmark
Ask Question
Description

Zener-Diode BZX85/C18

  • 1,3 W
  • 18 V
  • DO41
Manufacturer
Herstellerinformationen | Manufacturer Information
Vishay Electronic GmbH
Hofmark-Aich-Str. 36
84030 Landshut
Germany
https://www.vishay.com/
Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no reviews yet. Be the first who rates this product.

Customers who bought this product bought also the following products:

Carbonfilm Resistor 10k / 1 Watt, Pack of 5
Carbonfilm Resistor 10k / 1 Watt, Pack of 5

Carbonfilm Resistor
Low noise, small size, high power rating
Power: 1 Watt
Voltag: 500 V working / 1000 V overload
Axial Leads
-55° C - 155° C
12 * 5 mm
RoHS

0,80 €
0,16 € per Piece

Z-Diode BZX85 C6V2
Z-Diode BZX85 C6V2
Zener-Diode BZX85/C6V2
  • 1,3 W
  • 6,2 V
  • DO41
0,15 €

Tubular Film Capacitor 0,22 µF / 630 V
Tubular Film Capacitor 0,22 µF / 630 V
  • Type: Tubular Metalized Polyester Film Capacitors
  • Voltage Rating: 630 V
  • Tolerance: +/- 10%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Termination Style: axial
    • Non-inductive
    • Self healing windings.
    • Similar to the Mallorys 150-Series
0,72 €

Signal wire LiYDY 1 x 0,14 mm², shielded, 2m
Signal wire LiYDY 1 x 0,14 mm², shielded, 2m
  • Signal wire LiYDY 1 x 0,14 mm², shielded
  • Diameter Outside: ca. 2,6 mm
  • Voltage Rating max: 50 / 75 V AC / DC
  • Capacity: ca. 260 pF / m
  • Temperature range: -10 bis +70 C°
  • Conductor resistance: 40 Ohm / km @ 20 C°
  • Test voltage: > 1 kHz
  • IEC 60228/ VDE 0295
  • 2 meter
1,70 €
0,85 € per m

MOSFET LND 150
MOSFET LND 150
LND150N3-G - MOSFET
  • Transistor Polarity: N-Channel
  • Drain-Source Breakdown Voltage: 500V
  • Gate-Source Breakdown Voltage: +/- 20 V
  • Continuous Drain Current: 30 mA
  • Case: TO-92
  • ROHS: Yes

Files:

0,95 €

Rubber Grommet for Reverb Tank, 4 pcs
Rubber Grommet for Reverb Tank, 4 pcs
  • Rubber grommets for reverb tanks, package of four.
  • Mounting Hole Diameter = 3/8"
  • Outer Diameter = 1/2"
1,70 €

Tolex Glue SG5, 500 ml
Tolex Glue SG5, 500 ml

waterbased Tolex-Glue, 500 ml

How To use ?
The glue must be applied onto the wood and the Tolex.
After a dyring time of ca. 30 min the Tolex can be put onto the wood.

And how much glue do you need ?
The can of 500 ml is enough for ca. 2.3 m². This is enough for a TTC212REX and there is still about 100 ml glue left.

Attention
For a better adhesive power it is recommended to put a second layer of glue onto the tolex after the drying time.

Files:

12,80 €
25,60 € per Liter

Fender Style Reverb Driver 3,5 W 125A20B
Fender Style Reverb Driver 3,5 W 125A20B
Reverb Driver, Fender Style, direct replacement for item 125A20B
  • Power: 3,5 W
  • 4 Ohm @ 14k5
  • 8 Ohm @ 29k
11,50 €

Reverb Tank Bag 9"
Reverb Tank Bag 9"

Bag for Reverb Tank, Size: 9"  (22cm)

11,80 €

Kit LNDVerb
Kit LNDVerb
The LNDVerb kit is based on a classic Fender reverb circuit, but uses LND 150 Mosfets instead of tubes. These can be operated at voltages as high as 500 V, to get as close as possible to the characteristics of real tubes.

The kit can be integrated into an existing amplifier or can be build as standalone unit like the Fender tube reverb.

The unit needs less than 10 mA current, so a VPump for example can be used as power supply in a standalone build. If it gets integrated into an existing amplifier the already present power supply of the amp can be used to supply the needed voltage for the unit without the need to upgrade the power transformer.

A reverb transformer of the type 125A20B or similar and a reverb tank are necessary to operate the LNDVerb. These are both not included in the kit.

The needed RCA phone sockets and potentiometers are included in the kit.

Further informations and examples of the finished unit can be found in the PDF below.

Matching parts are linked below and can be ordered with the unit if needed.

Files:
 
16,20 €

Trim Strip white - Pack of 2 m
Trim Strip white - Pack of 2 m
PVC piping thin, without lip
  • Ø 2.5 mm
  • 2 m piece
1,95 €
0,98 € per m

Tube-Town Reverb Tank RCA cable, 200 cm
Tube-Town Reverb Tank RCA cable, 200 cm
  • Reverb Tank RCA cable, 200 cm
  • straight plugs
  • Replaces Fender®  Part # 002-5722-000
1,85 €

Accutronics Reverb Tank 8EB2C1B
Accutronics Reverb Tank 8EB2C1B
  • Springs: 3
  • Delay Type: medium
  • Size: short (9 ¼" / 23,5 cm)
  • Input Impedance: 800 Ohms
  • Output Impedance: 2575 Ohms
  • Mounting: Horizontal Open Side Down
  • Connectors: Input Insulated - Output Grounded
  • Accutronics by Accu-Bell, Made in Korea
Suitable for these amplifiers Fender® Blues Jr., Deluxe 90, Princeton 65, Stage Series, Acoustasonic Junior, Vaporizer, Ultimate Chorus, Ultra Chorus, Sidekick Keyboard 60, Sidekick Reverb 35, Super 60, Super 112, Frontman 65R, Eighty-Five, Tech 21® Trademark 30, Epiphone® Valve Junior Hot Rod, Vox® AC15CC, AC15C, Peavey® Envoy 110, Ultra 60/120, Backstage, Valveking and similar models.


 
26,00 €

WIMA MKP 10 - 0,022µF / 400 V - RM 7,5 - film capacitor
WIMA MKP 10 - 0,022µF / 400 V - RM 7,5 - film capacitor
  • Type: Film capacitor
  • Dielectric: polypropylene film
  • Coating: plastic foil, metalized on both sides
  • Capacitance: 0,022 µF
  • Voltage Rating: 400 VDC / 250 VAC
  • Tolerance: ±10 %
  • IEC climate category: 55/100/56
  • Operating Temperature Range: - 55°C / + 100 °C
  • Dimensions: 4 x 9 x 13 mm
  • Termination Style: radial
  • Grid: 7,5
0,45 €

Alpha Potentiometer 1 MOhm log / 16 mm
Alpha Potentiometer 1 MOhm log / 16 mm
Panel Mount Potentiometer
  • Power Rating: 0,125 W
  • Voltage Rating: 150 V AC
  • Tolerance: 20%
  • Shaft: 6,3 mm, Solid Shaft
  • Shaft length: 15 mm
  • Drill Ø: M7 (6,8 mm)
  • Termination: Solder lugs
  • Dimension: 16 mm
0,95 €